![]() You will have to create a separate racoon configuration file with your settings and add an include directive in Apple's default /etc/racoon/nf file, to make sure the racoon client reads your modified configuration and executes it. ![]() The Apple Mac's Network Preferences GUI does not provide sufficient settings to allow you to configure a connection with the Netvanta.Even if you modify its nf file by setting 'mode_cfg off ', this client setting appears to have been hard coded by Apple and will still ask for MODE_CONFIG information from the router. The Apple Mac client asks Netvanta for MODE_CONFIG data.Even if Phase 1 completes, IPSec Phase 2 always fails. Attempting to connect without XAUTH is a hit and miss affair for IKE Phase 1. The native Apple Mac 'Cisco IPSec' VPN client requires XAUTH.Other recent OSX versions should work too. I tried this on an Apple MacBook Pro running OSX El Capitan v.10.11.6. Apple are using their own fork of racoon to manage IKE negotiation, but it will not work out of the box by just using the Network Preferences VPN GUI, without creating a separate configuration file for it. ![]() ASA Version 8.2(5) ! hostname ciscoasa enable password xxxxxxx encrypted passwd xxxxxxx encrypted names name 192.168.5.56 RichardServer ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.5.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! ftp mode passive object-group protocol DM_INLINE_PROTOCOL_1 protocol-object udp protocol-object tcp object-group network SSHserver object-group network Webserver object-group network SSHServer object-group service RichardPort tcp port-object eq 5000 access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit icmp any any access-list inside_access_in extended permit object-group DM_INLINE_PROTOCOL_1 any any eq sip access-list outside_access_in extended permit icmp any any access-list outside_access_in extended permit tcp any host RichardServer object-group RichardPort pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 asdm history enable arp inside 192.168.5.65 0800.373f.0bc9 arp inside 192.168.5.64 0800.37ab.2bd8 arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 5000 RichardServer 5000 netmask 255.255.255.255 access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.5.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.5.6-192.168.5.149 inside dhcpd dns 8.8.8.8 8.8.4.After various attempts I managed to get Apple Mac's native VPN client to connect to a Netvanta 3120. I am still learning Cisco firewalls, and have almost no Mac knowledge, what do I have to do to allow Macs access to Office B from our Office? Office A firewall config file below. Which leads me to believe the problem is in how my firewall is configured. Occasionally some form of Executive with a Macbook will come in and be unable to connect to Office B from Office A, but they are able to connect to Office B from anywhere else using their Macbook built in VPN client. Both offices use a Cisco ASA 5505 Firewall device and our regular users connect successfully on their windows machines (most use the Shrewsoft Client). Many users at my office (A) frequently connects to a separate office (B) via individual IPsec (IKEv1) VPN tunnels.
0 Comments
Leave a Reply. |